ICEMAN's industrial ice machines are widely used by many industries. They are suitable for food manufacturing, snow making at ski resorts, and ensuring the optimal freshness of seafood products, and can also be an integral part of marine equipment. They are suited for use at construction sites, chemical plants and other industrial locations as well.
Flake Ice Machine
"Low-cost & User-friendly"
Models: The 5M series consists of machines ranging from the 5M-100 to the 5M-250F. The ice-making capacity varies from 1 to 25t/day while the thickness varies from 1 to 1.5mm.
Flake ice has a large surface, which allows water to cool down quickly. With no sharp edges, it can also be used with pre-cut vegetables and small fish without damaging them.
On-Board Flake Ice Machines
(Sea Salt Water Ice Machine)
Models: The 6M series consists of machines ranging from the 6M-100 to the 6M-100F. The ice-making capacity varies from 1 to 10t/day.The machines' low ice-making temperature (-8 immediately after ice-making) allows for the production of flake ice whose temperature is lower than the average.
The temperature can be increased to exceed -8 by reducing the concentration of salt water. By the same token, the machines can produce softer ice when fresh water is used. They are designed to tolerate the rocking and pitching of fishing vessels
Plate Ice Machine
"Crushed Ice & Tran***rent IceModels"
The PI series consists of products ranging from the PI-1.5 to the PI-20. The ice-making capacity varies from 1.5t to 20t/day. These machines produce ice with the thickness ranging from 10 to 18mm on a plate then crush the ice before ejection. The crushed ice is tran***rent and suitable for transporting seafood products and maintaining freshness of the products.
Plate Ice Machine
Large-scale Unit (Pat. 3364454)
Models: The PHG series consists of an array of machines for which ice-making capacity exceeds 20t/day.
By using hot-gas in their ice-ejection cycle, it creates an efficient operation syst
|
Home
